 |
| Maintenance Lube for Dry Hot Work Areas |
|
| Dry Moly Lube is a required product for proper maintenance of Enerpac's Hydraulic Torque Wrenches.
Moly Lube is a lubricating dry film with Molybdenum Disulfide that reduces friction and improves overall operation performance. It withstands high temperatures and extreme pressures. Ensure the Enepac tool you own, operator or use is regularly maintained with plenty of Dry Moly Lube. Refer to Enerpac's maintenance manual and schedule for the specific tool in question.
Gustin Hydraulics is an exclusive western supplier of this product.
Part# 03084
Quantity 12 per carton
16 oz cans
Net product weight 11 oz each can.
$7.69 ea
|
| - ISO 13678 Thread Compound |
“2000”® NM
High-Pressure, High-Temperature Thread Compound
for Casing, Tubing, Line Pipe and Bolting
“2000”® NM conforms with ISO 13678 and API RP 5A3
COLOR Black
PENETRATION 310 - 330 (ASTM D-217)
WEIGHT/GALLON 10.2 pounds/gallon
DROPPING POINT 350°F/177°C (typ)
FLASH POINT 385°F/196°C (min)
BRUSHABLE TO 10°F/-12°C
SERVICE RATING 500°F/260°C
TORQUE FACTOR 0.90 (Relative to API Modified)*
Bestolife “2000”® NM is the nonmetal
alternative to API Modified. It is based on the proven formulation of
regular grade Bestolife “2000”®, the industry standard that has been
used by every major pipe threader and manufacturer in the U.S. over the
past five years. Bestolife “2000”® NM conforms with ISO 13678 and API
RP 5A3. It will meet or exceed the listed performance objectives in ISO
13678 and API RP 5A3 as well as the requirements of API Specification
5CT. The major solid components of Bestolife “2000”® NM are a
proprietary blend of nonmetallic materials that are inert to chemical
attack, such as occurs in sour gas environments and with CO2 injection,
and are stable to temperatures in excess of 500°F. It also addresses
one of the major concerns in pipe yards and threading operations today
- rejects due to pitting and corrosion. In a 700 hour salt fog spray
test, the base grease and additive package utilized in Bestolife
“2000”® NM has demonstrated corrosion protection that exceeds the
performance of the leading storage compound in the industry. The
results of these tests show that Bestolife “2000”® NM is not only an
excellent “running” compound but can also provide superior protection
during long term storage.
*The proper field torque for all API
casing and tubing connections should be determined by following the
procedures outlined in API RP 5C1: “Recommended Practice for Care and
Use of Casing and Tubing”.
MATERIAL SAFETY DATA SHEET
DO NOT USE ON OXYGEN LINES OR IN OXYGEN ENRICHED ATMOSPHERES.
Available in 1 Gallon Container.
$54.60/Gallon.
|
 |
| Maintenance Lube for High Humidity Work Areas |
|
| Oakite Penetrating Oil is a required product for proper maintenance of Enerpac's Hydraulic Torque Wrenches when torque wrenches are being used, stored or otherwise exposed to wet or high humidity conditions. If at any time, the wrench is expected to get wet or moist, apply copious quantities of Oakite Penetrating Oil to all inner and outer surfaces of the tool. Some disassembly may be required. Refer to Enerpac's maintenance manual and schedule for the specific tool in question. Oakite Penetrating Oil effectively displaces water.
Oakite Penetrating Oil should not be used in areas of excessive heat or where spark or flame may be present. Flash point is 104 degrees F. (40 degrees C)
Gustin Hydraulics is an exclusive western supplier of this product.
Part# 6415027
Quantity 12 per carton
Net product weight 15 oz each can.
$16.09 ea
|
|